Whether you are a car enthusiast or simply want your vehicle to look its best, using car care polish products will not only keep your car looking good, it will also help your car retain its value and protect it from harmful elements. A car’s finish can quickly be damaged by the elements, including the sun, dirt, salt, and debris. A quality finish on your car can help minimize damage from all of these. Protecting your car is faster and easier than you might think. Using car care polish products in between waxing is a great way to keep your car shiny and add extra protection.

Before treating your vehicle with a car wash polish, you’ll need to give it a thorough bath. Use a cleaning product specifically designed for cars, as these do not contain abrasives found in many household cleaning products. Your goal is to protect your car, not add any damage, and using the right tools for the job will ensure this happens. When washing your car, do not do so in direct sunlight, as this can cause damage. Also, wait until the motor has cooled if the car was recently driven. Pour a small amount of the car wash liquid into a bucket of cool water, and wet your car with a hose. Use a car wash mitt to remove dirt and grime rather than a high-pressure sprayer on your hose. For stubborn or caked on dirt and grime, such as around the base of the car and the tires, you may need to use another bucket or mitt. A high-powered sprayer may be used on tires and wheel wells. Do not go back to clean the upper part of your car with a dirty mitt after cleaning the lower parts of your car. If you missed a spot, use a fresh mitt. Rinse your car with a regular hose; you do not need to use a high-pressure sprayer on the body of the car. Before you apply car care polish products, you need to dry your car carefully.

How you dry your car prior to using a black car polish or colored car polish is important. Be sure to find a few towels made of 100% cotton. After you’ve washed your car, dry it with the towels by patting the car rather than wiping. Again, this helps prevent any scratching. Start at the top and work your way down. Be sure that you do not miss any water spots. When the car is dry, you will need additional terrycloth or specialty towels for the polish. This ensures that you do not scratch the finish and helps you apply the polish evenly. You will need one or two to apply the car care polish products, and a few more to shine the vehicle afterwards.

Following the directions on the car wash polish product, again begin at the top and work your way down. Start with the roof, applying about a one-inch amount of black car polish or colored car polish to the cloth. Work in small areas using a circular motion. You only need to apply polish to each area once, allowing it to dry to a haze. When the polish has dried, use another towel to go back over the area, again using small, light, circular motions. Work each section, applying the car care polish products, allowing it to dry, and buffing it. Do not apply too much pressure, but rather, work to give the car wash polish a nice shine. As you apply the car care polish products, use a lighter touch around corners, as these areas have a thinner layer of paint.