To operate effectively, wiper blades need to be replaced at least one time per year – and much more frequently when they show signs and symptoms of wear. Frost, sunlight and road spray combined to wreck and harden rubber blades and corrode metal wiper parts.

When replacing your wipers, you have to ensure you have the correct size. However, do you know you will find many possibilities to you personally in choosing your wiper blades?

Replacement Rubber Blades

In the event the metal areas of the wiper assembly aren’t damaged, it is often possible to change just the rubber blade, if your suitable replacement could be located. Remove the existing blade, normally by bending a tiny retaining flap and pulling the blade out. The replacement rubber can be cut to size then slid in to place.

This is a cheaper option if the blades are compatible, but worn wiper arm components, or damage to the metal wiper holder means you’ll have to replace the complete blade assembly fairly regularly too.

Standard or OEM Wiper Blades

Standard wiper blades on most cars have a metal body that’s made to enable curved screens. These are easily obtainable from your selection of manufacturers, although most car handbooks specify Bosch or Valeo brands. The newest blades tend to be provided with a variety of fittings, and replacing the blade generally is a case of taking out the old blade assembly from your wiper arm, selecting the correct fitting, and connecting the new wiper blade assembly for the arm.

Wiper Blades With Spoilers

Specified for your drivers side for quite a few vehicles, a spoiler props up blade more firmly contrary to the screen at high speeds, giving improved wiping performance. If you find your overall blades don’t clear the windscreen effectively at high speeds, consider deciding on exactly the same size having an added spoiler.

Some blades come with detachable spoilers, however for most makes, the spoiler is integrated using the blade assembly.

Flat Beam Blades

Now being fitted as original equipment of some cars, flat beam blades, such as the Bosch Aerotwin, would be the next generation of windscreen wipers. Without metal frame, a spine inside the blade body is built to hold them firmly against the screen, but nonetheless allowing some flex.

Now available being an upgrade substitute for fit most vehicles, flat beam wiper blades will fit most wiper arms. Fitting is extremely similar to standard blades, nevertheless they often have to be net healthy by hand to make sure they contact the screen at all points.

Because they are very flat, and have an aerodynamic shape, flat beam blades have no need for add-on spoilers to supply effective cleaning at all speeds.

Specialist and Rear Wiper Blades

Quite a few models of car now use specialist blades, especially curved blades to be used in rear windows. Unfortunately, you often don’t have any choice but to select the original manufacturers make, which may be expensive, but shop around rather than buying them from a local main dealer, as you can generally find lower prices online or with a specialist retailer.